Titanium products stall: white and blue corner with sample display
A white and blue corner stall for a titanium products maker, with blue portal frames, product graphics, titanium tanks and anodes on show and a lit counter.
What we built
Built in February 2026, this corner stall was for a manufacturer of titanium products, including parts that appear to be meant for electroplating lines. It is open on two sides, with a reception counter at one corner, a product display along the back wall and a glass table with chairs for meetings.
Design and finishes
The stall is white with blue as the second colour. A white fascia with a blue band along its top edge holds a row of downlights, and on one side the fascia rises into a taller angled header carrying a Make in India graphic. Blue portal frames mark the open sides and give the white walls a clear edge. On the side facing the aisle, a large printed panel presents the titanium fasteners range, from bolts and screws to nuts, washers and studs.
Inside, the back walls carry lit product graphics for titanium tanks, custom titanium baskets, MMO anodes and platinized anodes. Real samples sit in front of them on a blue plinth: a tank, baskets, anodes and pipe sections, so visitors can see the products and not only the pictures. The reception counter is white, with thin LED strip lines set into the front at angles and the company logo on its face. A literature stand, glass-top round tables, white shell chairs on timber legs and light grey carpet complete the stall.
Built in our factory
The stall was designed in 3D, then built and dry-assembled in our Bengaluru factory. The plinth was planned to take the weight of the metal samples, and the counter lighting was fitted and tested before dispatch.
On the floor
Our own crew installed the stall and handed it over before the show opened, and dismantled it after. The photos show the team at the stall with the samples laid out behind them.
