Jinharsh: red and white corner stall with open product shelving
A red and white corner stall for Jinharsh with a logo fascia on two sides, open product shelving, partner brand panels and a lit mannequin plinth.
What we built
This is a corner stall for Jinharsh, a supplier of industrial products and safety equipment. It is open on two sides, with a red frame, a white fascia carrying the logo on both faces and a busy, product-led interior. Partner brand sections are built into the walls, and a neighbouring section for Groz sits alongside.
Design and finishes
The structure is a red box frame with white fascia panels, and a row of spotlights on short arms runs along the top edge to light the logo and the stall below. Red posts at the corner and along the front keep the sides open to the aisles.
Inside, the walls are made of white open shelving with red backs, so each shelf works as a small display box for products. Branded panels for Timken and Dräger sit at the top of their sections, with product graphics below. Shelves at the back hold safety equipment such as masks and breathing gear, and a wall-mounted screen near the front corner shows product information.
The front corner carries a mannequin dressed in safety gear, standing on a stacked plinth of white and red blocks with the Jinharsh name on the red band and LED light glowing from the joints. A matching lit plinth with planter stands nearby. Next door, the Groz section has an orange perforated panel and display shelving of its own. Furniture includes white chairs and a small glass table, and the floor is a light grey carpet on a low platform with a white edge.
Built in our factory
Like every KaamKRAFT job, the stall was designed in 3D first, then built and dry-assembled in our Bengaluru factory. The shelving, plinths and fascia were checked together there before the stall was packed.
On the floor
Our own crew installed the stall, fitted the lighting and handed it over before the show opened. After the show, the same team dismantled it.
