E-Square: green and white corner stall with a logo tile feature wall

What we built

This is a corner stall for E-Square, open to two aisles, built in June 2026. The structure is white with deep green inner walls, and the brand's green and white logo appears on the fascia, on the front counter and repeated across a full height feature wall. The layout keeps the corner open so the inside of the stall can be seen from both aisles.

Design and finishes

The fascia steps up at the corner and carries a set of white horizontal louvres that break up the flat top and give the stall some depth. Below it, spotlights on short arms light the green walls. The green is a dark, flat paint finish that lets the white logo panels and display pieces stand out.

The strongest element is the feature wall on the right: a tall panel covered in a checked pattern of black and white tiles, each carrying the E-Square logo. A wire rack unit stands in front of it on a white plinth, showing the kind of product the brand makes. On the back wall, a white open display box holds wall-mounted pieces, and a slatted panel beside it shows further fittings. Inside, a large graphic shows a fitted kitchen in green and white, with a small dated badge above it, and a long white counter runs along the inner wall.

At the corner, a white L-shaped reception counter carries the logo in large green graphics on both faces, so it reads from either aisle. The floor is a dark carpet on a low platform with a green edge trim. White chairs and a glass table sit inside for meetings.

Built in our factory

Like every KaamKRAFT job, the stall was designed in 3D first, then built and dry-assembled in our Bengaluru factory before it went to the venue. The louvred fascia and the tile wall were checked at this stage so the joints and pattern lined up.

On the floor

Our own crew installed the stall, fitted the lighting and handed it over before the show opened. After the show, the same team dismantled it.