Core Crushing Equipments: outdoor stall with a red arch entrance and machinery display
An outdoor stall for Core Crushing Equipments: a branded overhead frame, a red and white angled arch, red flooring, a white picket fence and a cabin behind, around the brand's crushers.

What we built
This is an outdoor stall for Core Crushing Equipments, a maker of crushing equipment. The stall sits on an open-air plot, with the brand's own jaw crusher and cone crusher on display on either side of the entrance. Everything we built had to read clearly in full sun, next to large machines.
Design and finishes
A long white overhead frame spans the front of the plot and carries the company name with its logo at both ends, so the stall is identified from across the ground. Under it, the entrance is an angled red and white arch with the CORE logo, leading onto a red carpeted walkway.
Through the arch, a white cabin with a red door gives the team a closed room for meetings and storage, with a branded counter beside it. Large printed boards behind the machines carry the brand's message and product photos, and tall flag banners stand at the entrance and along the sides.
A white picket fence with red tips runs around the plot, and the red flooring continues across the front. The red and white scheme ties the arch, cabin, boards, fence and floor together, so the whole plot reads as one brand.
Built in our factory
As with every KaamKraft job, the stall was designed in 3D first and built in our own factory. The frame, arch, cabin and fence were made in sections so they could be carried to the ground and fixed together on site.
On site
Our own crew installed the stall at the venue, set up the frame, arch, cabin and fencing around the machinery, and handed it over before the show opened. After the show, the same team dismantled it.







