Amruta: red and white outdoor stall with a portal arch entrance

What we built

This outdoor stall for Amruta, a construction equipment brand, sits in an open-air display area alongside the brand's own machinery. Built in June 2026. The centre of the build is a large portal arch that acts as the entrance, with a small branded pavilion behind it and railings with logo boards running around the machinery on either side.

Design and finishes

The arch is made of two broad, tapered red columns, each banded with white stripes, set on red base blocks. Across the top runs a white louvred header with a large circular logo disc in the middle. The shapes are bold and simple, which matters outdoors where the stall has to hold its own next to tall plant and equipment.

Behind the arch, the floor is a raised platform finished in a pink and red sheet. A curved white information counter with its own round canopy carries the logo and graphics of the product range. At the back stands a red structure with an arched white header and a screen, with framed photographs mounted below it and an angled graphic stand beside them. A few white chairs and a parasol make a small seating corner to one side.

Outside the arch, white tubular railings frame the machinery, with Amruta logo boards fixed at intervals. Tall flag banners on poles carry the brand name vertically, and potted plants line the edge of the platform. The same red and white scheme runs through every element, so the whole plot reads as one brand from a distance.

Built in our factory

As with every KaamKRAFT job, the stall was designed in 3D first, then built and dry-assembled in our Bengaluru factory. The arch columns, header and counter were made as sections that could be carried to the ground and fixed together on site.

On site

Our own crew carried out the installation at the venue, set up the arch, counter and railings, and handed the stall over before the show opened. After the show, the same team dismantled it.