FreeExhibiting soon? Get a free stall design for your next show
KAAM BOLTA HAI !!Exhibition stall design & build • Own factory
Get a free stall concept for PU Tech Get a free stall concept for PU Tech
← All posts
Show guides

PU Tech 2027 Stall Guide: Stands for the Polyurethane Industry

PU Tech, 20 to 22 Jan 2027 at India Expo Centre & Mart: stall ideas for polyurethane chemicals, machinery and foam products, with a timeline and checklist.

Inside the Surprise Studio stall with gift sets on lit shelves, yellow arches and an angled counter
Gift shelving and the counter.

PU Tech is listed for 20 to 22 January 2027 at India Expo Centre & Mart in Greater Noida. Dates are as listed in venue and organiser calendars; confirm with the organiser. As the name suggests, it is a show for the polyurethane industry.

Polyurethane is everywhere but rarely visible. It is in mattresses, car seats, shoe soles, insulation panels, coatings, adhesives and many industrial parts. That makes a PU stall an interesting design problem. The raw material looks like a drum of liquid, but the products made from it are familiar and tactile. A good stall connects the two.

Who visits a polyurethane show

A show for this industry usually draws buyers and technical staff from sectors that use PU: furniture and mattress makers, automotive seating and parts suppliers, footwear manufacturers, insulation and cold chain companies, construction material makers, and coating and adhesive users. Machine buyers, chemists, plant managers and distributors make up much of the audience.

  • Technical visitors want formulations, properties and processing data.
  • Plant managers want machines that are reliable, efficient and easy to service.
  • Product companies want new materials that improve comfort, weight or performance.
  • Distributors want product range, supply security and support.
Team inside the stall beside titanium tanks and baskets graphics with a literature stand
Inside the stall.

Show the product, not just the drum

Application walls

Build a wall of finished products grouped by industry: a seat cushion, a shoe sole, an insulation panel cut-away, a coated surface. Label each with the system or grade used. Visitors immediately see where your chemistry ends up.

Touch and compare

Foams differ in density, softness and recovery. Put samples at counter height so visitors can press, bend and compare them. A simple comparison board, firm to soft, works better than a spec sheet alone.

Cut sections

For panels, moulded parts and composite products, cut sections show the internal structure and quality of the foam. Light them well and mount them where people can look closely.

Machinery

If you exhibit dispensing, foaming or moulding machines, plan the footprint, power, access and safety space at the design stage. Check the exhibitor manual for floor loads and the move-in schedule for heavy exhibits. Running machines with chemicals may need extra permissions, so ask the organiser early.

Speak to each industry

Because PU serves so many sectors, a single generic message rarely works. Pick the two or three industries you most want to win at this show and give each a clear zone or panel. A footwear buyer should be able to find the footwear section within seconds, without reading about insulation first.

Where you supply both chemicals and machines, show them as one system. A visitor who sees the material, the machine and the finished part together understands your offer far faster than one who has to piece it together from separate displays.

Layout ideas

  1. Front: one key application, such as a car seat or mattress section, under a clear headline.
  2. Side wall: application display grouped by industry.
  3. Centre or back: machine display, with a safe viewing line.
  4. Counter: samples to touch, datasheets and lead capture.
  5. Meeting area: for technical and commercial discussions.

Timeline working back from 20 January 2027

For Indian shows we ask for a brief 6 to 8 weeks before opening. For PU Tech, that means between about 25 November and 9 December 2026.

  1. 25 Nov to 9 Dec 2026: brief, plot size, open sides, exhibit list and exhibitor manual.
  2. December: 3D concept, revisions and approval.
  3. Late December to early January: fabrication in our own factory by our own crew.
  4. Before dispatch: the stall is assembled once and checked against the approved design.
  5. Five working days before possession: final artwork files with us.
  6. Build-up: installation by our crew; machines placed in coordination with the build.

Exhibitor checklist

  • Exhibit list with sizes, weights and power needs shared with us.
  • Any chemical handling or machine running approved with the organiser.
  • Samples prepared for every major application and grade.
  • Technical staff and chemists on the stall at peak hours.
  • Datasheets available in print or by QR code.
  • Meetings booked with key buyers and distributors.

Using the three days well

Industrial visitors often plan their show route in advance. Send invitations with your stall number to existing customers and target accounts before the show. On the stall, note each lead's industry and application so your technical team can follow up with the right information.

Questions exhibitors ask

Do you install at India Expo Centre & Mart?

Yes. We build your stall and our own crew installs it at the venue in Greater Noida. Our team has 6+ years in stall fabrication and has delivered work in 34 cities.

Can the stall be reused?

Yes. We can store it after the show and reuse it with new graphics for your next event.

How do we start?

Request a free first concept on our free stall design page. We reply within one working day.

#PU Tech#Greater Noida#polyurethane#India Expo Centre#exhibition stall

Tell us about your next show

Send the show, the stall size and the dates. We reply within one working day.

Free designCallWhatsApp