Plastivision India Stall Guide: Machines, Moulds and Materials at NESCO
Plastivision India, 21 to 25 Jan 2027 at NESCO Mumbai: stall planning for plastics machinery, moulds and materials, five-day shows, timeline and checklist.

Plastivision India is listed for 21 to 25 Jan 2027 at the Bombay Exhibition Centre (NESCO), Mumbai, as per venue and organiser calendars; confirm with the organiser. It is a major meeting point for the plastics industry: injection moulding and extrusion machines, moulds and dies, polymers and masterbatches, auxiliaries, recycling equipment and automation.
The show runs for five days, which is longer than most. That changes how you plan the stall. Finishes must survive heavy footfall, machines must run reliably day after day, and your team needs a stall that is comfortable to work in from opening to close. This guide covers how to plan for all of that.
Who visits a plastics show
- Moulders and processors looking for new machines, moulds and materials.
- Plant heads and production managers comparing output, energy use and automation.
- Purchase teams from packaging, automotive, consumer goods and appliance makers.
- Recyclers and sustainability teams exploring recycling equipment and recycled materials.
- Dealers, agents and exporters looking for new lines.
Plastics buyers are technical and cost conscious. They want to see cycle times, part quality, energy use and service support, and they often want to watch a machine produce real parts.
What your stall should showcase
Running machines
A running machine producing parts is the strongest attraction at a plastics show. Make it the focus, with a safe viewing area and a display of the parts it produces. Hand out samples where possible; visitors like to take parts away.
Moulds, dies and tooling
Moulds are heavy and detailed. Display them on strong plinths at a comfortable height, with good lighting, and show the finished part next to each mould. A cut section or an open mould shows the quality of the work inside.
Materials and masterbatches
For materials suppliers, the challenge is making pellets and granules interesting. Show them in clear containers alongside the finished products they go into. Colour masterbatch suppliers can use colour walls and moulded colour samples to striking effect.
Planning for machines on the stall
Machinery stalls need careful coordination with the venue. Check the exhibitor manual for NESCO and plan for these needs.
- Machine sizes, weights and floor loading limits.
- Machine entry route, unloading and placement before walls are built.
- Power load, supply type, and any cooling water or compressed air.
- Material supply, hoppers and dryers for running machines.
- Safety guards and a clear viewing zone around moving parts.
- Height limits for tall machines and overhead signage.
Machine arrival and stall build must be scheduled together. Large machines usually go in first, then the stall structure goes up around them.
Layout ideas
- **Production line layout:** machines arranged as a small production cell, from material feeding to finished part.
- **Machine island layout:** one large machine in the centre with open access on all sides and a meeting area at the back.
- **Materials showroom:** product walls and display tables, a colour wall and a seated meeting lounge.
For a five-day show, include a staff rest area, a storeroom and enough seating for long meetings. A tired team sells less on the fourth and fifth days.
Durability for five days
Floors, counters and edges get heavy wear over five days. Choose hard-wearing flooring, protect counter tops and keep spare graphics or panels in the storeroom for quick fixes.
Timeline working back from 21 January
For Indian shows we ask for the brief 6 to 8 weeks before. For Plastivision India that is between 26 Nov and 10 Dec 2026.
- Late November to early December: brief, plot details, machine list with sizes, weights and services.
- December: 3D design, revisions and organiser submission.
- December to early January: fabrication, finishing and graphics.
- Mid January: full assembly and check against the approved design.
- Five working days before possession: final artwork files with us.
- Build-up: machine placement first, then structure, graphics, lighting and testing.
The year-end holidays fall in this period, so try to finish design decisions before them.
Exhibitor checklist
- Machine list with sizes, weights, power, water and air needs.
- Machine transport and unloading arranged with your logistics partner.
- Moulds, parts and material samples for display.
- Sample parts to hand out.
- Staff rota covering all five days.
- Logo and artwork files.
How we build your stall
We design in 3D and build in our own factory with our own crew. We do not subcontract the build. Every stall for an Indian show is assembled once and checked against the approved design before it leaves, so installation at NESCO is quick and fits around machine placement.
Questions exhibitors ask
Can the stall be built around machines already placed on site?
Yes. We plan the build sequence with your machine delivery, so the structure goes up around the machines.
Can the stall be reused for other plastics or packaging shows?
Yes. Stalls can be stored after the show and reused, with graphics updated.
How do we start?
Send your plot and machine list through our free stall design form. The first concept is free, and we reply within one working day.
