FreeExhibiting soon? Get a free stall design for your next show
KAAM BOLTA HAI !!Exhibition stall design & build • Own factory
Get a free stall concept for PaintIndia Get a free stall concept for PaintIndia
← All posts
Show guides

PaintIndia Stall Guide: Paints and Coatings Exhibitors at Yashobhoomi

PaintIndia, 12 to 13 Mar 2027 at Yashobhoomi, New Delhi: how paint, coatings and raw material suppliers plan a stall, show finishes and meet technical buyers.

Wide view of the Craloft stall with its black fascia, lit shelving and white plinths on a timber-look floor
The stall from the aisle

PaintIndia is listed for **12 to 13 Mar 2027** at Yashobhoomi (India International Convention & Expo Centre), New Delhi, as shown in venue and organiser calendars; confirm with the organiser. The show is about paints and coatings and the industry around them: raw materials, additives, pigments, equipment, testing and application.

This is a technical audience. Formulators, chemists, plant managers and purchase teams come to find better materials and processes. A two-day show leaves little room for slow conversations, so the stall must make your offer clear quickly. This guide covers how.

Who you will meet

  • Formulators and R&D chemists looking for new raw materials and additives.
  • Production and plant managers looking at mixing, milling, filling and packing equipment.
  • Quality and lab heads interested in testing instruments.
  • Procurement teams comparing suppliers, pricing and supply security.
  • Applicators and contractors looking at coating systems and equipment.

These visitors will ask about chemistry, performance data, regulatory status and consistency between batches. Bring people who can answer.

BEC Group stall with green curved trim, backlit Bharath Electro Chem lettering and group counter
Corner view with the group counter.

What to showcase

Coatings are judged on finish. Visitors want to see colour, gloss, texture and protection on real surfaces, not only on a brochure.

  • **Panel wall**: coated panels in a grid, showing colour range, gloss levels or textures under good, even light.
  • **Before-and-after samples**: corrosion, weathering or abrasion test panels next to untreated ones.
  • **Raw material display**: pigments, resins or additives in clear containers, neatly labelled.
  • **Equipment demo**: a mixer, disperser or tinting machine running, if power and rules allow.
  • **Lab corner**: instruments and test results for quality-focused visitors.

Lighting finishes correctly

Hall lighting can distort colour. Build daylight-balanced lighting into the stall so panels look as they would in a lab viewing booth. Avoid strong coloured lights near colour samples, and keep glossy panels angled to avoid glare.

Stall finishes as a showcase

For a paint company, the stall itself can be a sample. Finish walls, fascia or flooring in your own products and say so on a small label. Visitors notice when a stall's surfaces prove what the company sells. Plan this early, since application and curing need time before the stall leaves our factory.

Layout ideas

Put the panel wall facing the busiest aisle and a counter at the corner. Use the back for a meeting table and a lab or data area. On a small stall, a single strong finish wall and a table may be enough. Keep chemicals and samples in closed storage, and check the exhibitor manual for rules on liquids, flammable materials and running equipment.

A two-day plan

Two days go quickly. Book meetings with key customers and prospects before the show, and keep half of each day free for walk-in visitors. Assign one person to run the panel wall and answer finish questions, and another to handle technical discussions at the table. At the end of day one, check which samples and data sheets are running low.

Collect the right details at every conversation: the visitor's company, the application, the volume and the specific material or finish they asked about. Formulators often need a sample and a data sheet within days, and fast follow-up makes the difference.

Who should staff the stall

Mix sales and technical people. A chemist on the stall can answer questions a sales person cannot, and buyers trust the answer more. Make sure everyone knows the products on display, their key properties and which items you can sample immediately.

Timeline working back from 12 March 2027

We ask for a brief 6 to 8 weeks before the show, which means **between 15 and 29 January 2027**. If your own coatings will be applied to the stall, aim for the earlier date.

  1. By mid January: brief with stall size, open sides and the finishes and products to show.
  2. Late January: 3D design, revisions and approval.
  3. Early February: drawings and service orders submitted as the manual requires.
  4. February: fabrication, application of your finishes and graphics in our factory.
  5. 5 working days before stall possession: final artwork files with us.
  6. Before dispatch: the stall is assembled once and checked against the design.
  7. Build-up: our own crew installs the stall at Yashobhoomi.

Checklist

  • Prepare panels well ahead and pack them so they arrive unmarked.
  • Bring technical data sheets and safety data for each product.
  • Brief staff on the questions formulators ask most.
  • Plan a sample request form so follow-ups are accurate.
  • Book meetings with key accounts before the two show days.

Questions exhibitors ask

Can you apply our paint to the stall?

Yes, with enough lead time. Share the product and application method at the brief and we will plan it into the build.

Can we reuse the stall?

Yes. Stalls can be stored and reused for the next show; panel walls can be updated with new ranges.

How quickly will we hear back?

Within one working day. Ask for a free stall concept for PaintIndia. Our team has 6+ years in stall fabrication, with our own crew.

#PaintIndia#Yashobhoomi#New Delhi#paints and coatings#exhibition stall

Tell us about your next show

Send the show, the stall size and the dates. We reply within one working day.

Free designCallWhatsApp