NSIC Exhibition Grounds, Okhla: Stall Planning Guide for New Delhi Shows
Planning a stall at NSIC Exhibition Grounds in Okhla, New Delhi: possession, height, power and load-in checks, plus IDAC and India Art Fair dates.

NSIC Exhibition Grounds in Okhla, South Delhi, hosts trade and industry shows through the year. It sits within the Okhla Industrial Estate, one of the city's established business areas, which makes it convenient for exhibitors and visitors from across the capital region.
We design the stall in 3D and build it on site with our own crew. This guide covers the practical checks that make a stall at NSIC go smoothly and lists upcoming shows at the venue. See our NSIC Exhibition Grounds venue page for more.
Upcoming shows at NSIC Exhibition Grounds
Dates are as listed in venue and organiser calendars; confirm with the organiser.
- IDAC New Delhi: 14 to 16 Jan 2027, energy, power and environment.
- India Art Fair: 4 to 7 Feb 2027, a major fair for modern and contemporary art.
For IDAC New Delhi, a 6–8 week brief means reaching us between **19 Nov and 3 Dec 2026**. For India Art Fair, the window runs from **10 Dec to 24 Dec 2026**. These two shows are very different, which shows how varied the venue's calendar can be.
Start with the exhibitor manual
Every show at the venue issues its own exhibitor manual. Rules on height, power, timings and approvals can differ from show to show, even at the same venue. We design from the manual for your specific show, not from general assumptions.
- **Possession date and time.** When you get the space, and how many hours are available for build-up.
- **Height limit.** The maximum build height and whether overhead hanging is allowed.
- **Stall type.** Whether your space is raw floor for a custom build or a shell scheme with walls already in place.
- **Power.** Load available, how to apply and the deadline. Late applications can leave a stall without enough power.
- **Load-in.** Vehicle entry, gate timings and where materials can be unloaded.
- **Approvals.** Whether the organiser needs drawings or structural details before build-up.
- **Dismantling.** When the stall must be cleared after the show.
Planning for an exhibition ground
Exhibition grounds can use permanent halls, temporary structures or open areas, depending on the show. Confirm which applies to your space. The answer changes the design.
In a temporary structure
Floors may be less even than in a permanent hall, and lighting can be dimmer. A raised platform and our own stall lighting fix both. Plan for the build-up crew working into the evening.
In an open area
Think about sun, dust and wind. Use sturdy materials, shade and secure fixings. Keep electronics protected.
Delhi weather
The two shows listed here fall in winter, when mornings can be cold and foggy. Fog can slow early arrivals, so plan visitor timings and staff travel with some margin.
Getting there
Okhla is a working industrial area with heavy traffic at peak hours. Plan material deliveries and staff arrivals around this, and share clear directions with visitors you invite. Ask the organiser about parking for exhibitors and guests.
Designing for the show, not just the venue
A stall at an energy and environment show needs a different approach from one at an art fair. For a technical show, focus on product displays, datasheets and meeting space for engineers and buyers. For an art fair, the stall becomes a gallery: neutral walls, careful lighting and space for people to stand back and look.
- Technical shows: working models, screens with process videos, a seated meeting table.
- Art and design fairs: clean wall surfaces, adjustable track lighting, minimal branding.
- Consumer or general fairs: an open front, a clear product display and a counter for enquiries.
Whatever the show, the same basics apply. Keep your company name and what you offer readable from the aisle. Leave enough open floor for visitors to step in without feeling crowded. Store brochures, bags and stock out of sight. Plan lighting carefully, because good light makes products look better and staff easier to approach.
How we build at NSIC
Every stall is assembled once and checked against the approved design before it leaves. Our own crew installs it on site. We do not subcontract the build. We need final artwork files 5 working days before stall possession, and stalls can be stored and reused for your next show in Delhi.
Questions exhibitors ask
Can we visit the venue before designing?
A site visit helps, especially at a ground venue. If that is not possible, the exhibitor manual and the organiser's layout plan give us what we need.
Do you build shell scheme upgrades?
Yes. We can upgrade a shell scheme space with graphics, lighting and furniture, or build a custom stall on raw floor.
We exhibit at other Delhi venues too. Can one stall serve both?
Yes, if it is planned as a modular stall. The same core can be rearranged for a different stall size and open sides, with new graphics for each show. Tell us your full show list at the brief stage.
How do we start?
Request a free stall concept for your show at NSIC. We reply within one working day.
