Leaf Tech Expo 2027 Stall Guide: Planning for HITEX, Hyderabad
Planning a stall for Leaf Tech Expo, 1 to 2 Apr 2027 at HITEX Exhibition Centre, Hyderabad: machinery buyers, layout, a two-day plan and brief dates.

Leaf Tech Expo is listed for 1 to 2 Apr 2027 at HITEX Exhibition Centre, Hyderabad. It sits in the machinery, industrial and manufacturing category. Check the organiser's profile for the exact product categories before you plan your display.
Hyderabad is a large industrial and commercial centre, and HITEX draws visitors from Telangana, Andhra Pradesh and neighbouring states. A two-day machinery show leaves little room for a slow start, so the stall has to be ready, clear and well staffed from the first hour.
Who you will meet
- Owners of small and mid-sized manufacturing units looking at new equipment.
- Entrepreneurs planning to start a production unit, who want to see machines and costs.
- Dealers and distributors for the southern states.
- Suppliers of raw materials, spares and consumables.
Visitors at HITEX often travel in from other districts for the day. They plan their route around the stalls they already know they want to see, so pre-show invitations to existing contacts are worth sending a few weeks ahead.
Machinery shows in the region often attract first-time buyers. They need clear explanations: what the machine makes, output per hour, power needed, space required and support after purchase.
What your stall should showcase
- A working machine where the organiser allows it, with finished products beside it.
- A simple panel listing output, power, footprint and price range where you are comfortable sharing it.
- Raw materials and finished samples visitors can handle.
- A screen showing installation and training at a customer site.
- A meeting desk for detailed questions on finance and delivery.
Making a two-day show count
With only two days, every visitor counts. Run demonstrations at fixed times and show the schedule on the stall. Keep lead forms short and record each conversation the same way, so follow-up starts the day after the show.
Layout ideas
Put the machine at the front of the stall, angled to the main aisle, with a clear area around it for groups. Place product samples and the information panel beside it. Keep a seated meeting area at the back, with storage for literature and samples.
Running machines create noise and sometimes dust or offcuts. Plan a small enclosure or screen if needed, and keep the meeting area far enough away for a normal conversation.
Graphics and language
Use the fascia for your company name and one line on what your machines make. Put specifications and the support offer on panels near each machine. Many visitors in Hyderabad will be comfortable in English, but Telugu and Hindi on key panels and leaflets help you reach first-time buyers from smaller towns.
Talking about cost
First-time buyers often want to understand the full investment, not just the machine price. A simple sheet covering machine cost, installation, training, power use and typical output helps them compare suppliers and take the decision home. Share only what you are comfortable publishing, and keep detailed quotes for the meeting desk.
After the show
Plan follow-up before the show opens. Decide who calls each lead, within how many days, and what you will send: a quote, a video or an invitation to see a machine running at a customer's unit. Two-day shows end quickly, and the companies that follow up first usually win the order.
Timeline working back from 1 Apr 2027
- Brief between 4 Feb 2027 and 18 Feb 2027: 6 to 8 weeks before the show.
- First 3D concept and revisions.
- Drawings, machine positions and power loads submitted as the exhibitor manual requires.
- Fabrication by our own crew; the stall is assembled once and checked against the approved design before it leaves.
- Artwork files at least 5 working days before stall possession.
- Installation at HITEX, then the show on 1 and 2 Apr 2027.
Exhibitor checklist
- Plot plan, open sides and height limits from the organiser.
- Machine sizes, weights and power needs shared with us.
- Raw material and samples for live demonstrations.
- Leaflets in English and Telugu if your buyers are mostly local.
- Demo schedule and staff rota for both days.
- Plan to store the stall for reuse at your next show.
For venue details, see our HITEX page.
Questions exhibitors ask
Can you build at HITEX?
Yes. We design the stall in 3D and build and install it at the venue in Hyderabad.
How do we start?
Send your show, plot and machine details through a free stall design request. The first concept is free for an upcoming show, and we reply within one working day.
Can the stall be reused?
Yes. Stalls can be stored and reused for the next show. If you plan to exhibit at other machinery shows in South India, mention them in your brief so the design can be modular from the start.
Who builds it?
Our own crew, from our own factory. Our team has 6+ years in stall fabrication, and we do not subcontract the build.
