ChennaiWood 2026 Stall Guide: Stands for Woodworking and Interiors
ChennaiWood, 18 to 20 Dec 2026 at Chennai Trade Centre: stall ideas for woodworking machines, panels and fittings, plus a tight timeline and checklist.

ChennaiWood is listed for 18 to 20 December 2026 at the Chennai Trade Centre. Dates are as listed in venue and organiser calendars; confirm with the organiser. The show sits in the construction, building and interiors space, with a focus on wood, furniture making and the machines and materials behind them.
A stall at a woodworking show has a practical job. Visitors come to see machines run, feel panel finishes and check fittings. This guide covers who to expect, what to show and how to plan the stall in the weeks left before the show.
Who visits a woodworking and interiors show
Expect furniture manufacturers, modular kitchen and wardrobe makers, carpenters and contractors, interior designers, dealers and distributors. Many run small or mid-sized workshops and are deciding whether to invest in a new machine or switch suppliers. They are practical buyers who ask direct questions about output, finish, service and price.
What to put on the stall
Machines that run
A running machine draws a crowd faster than any graphic. If you sell CNC routers, edge banders, panel saws or sanding machines, plan a live demonstration. That needs a power supply of the right load, a safe working zone and space for offcuts and dust.
Materials people can touch
For laminates, veneers, boards and surfaces, build display walls and sample racks at hand height. Use good, even lighting that shows true colour and grain. Group samples by finish or application so visitors can compare easily.
Hardware and fittings in use
Hinges, channels, lifts and handles are best shown working inside real cabinets and drawers. A small kitchen or wardrobe module lets visitors open, close and test the movement.
Stall layout ideas
- Place the running machine at the front, with a barrier line so visitors watch from a safe distance.
- Keep a sample wall along one side where visitors can browse without staff.
- Put a small counter for enquiries near the machine, so the demonstrator can hand over leads.
- Leave a seated corner for dealers and larger buyers to discuss terms.
- Use the stall itself as a showcase: wood and panel finishes on our build can feature your own products.
For machine exhibitors, check the exhibitor manual for floor loads, the move-in schedule for heavy exhibits and any rules on running machines in the hall. Coordinate the machine's arrival with the stall build, as the machine often needs to be placed before walls go up.
Getting the most from three show days
Woodworking buyers often visit more than once. They see a machine on day one, return with a partner or engineer on day two and talk numbers on day three. The stall and staff plan should support that pattern.
- Run demonstrations at fixed times and post the schedule at the front of the stall.
- Keep a demo log so staff know which visitors have already seen the machine.
- Offer to cut or process a visitor's own sample where it is safe and practical.
- Have finance or dealer terms ready for buyers who want to close at the show.
- Keep the stall clean through the day; dust and offcuts make a stall look tired fast.
A woodworking stall also gets more wear than most. Visitors touch samples, open drawers and lean on counters. We build with that in mind, using durable finishes on counters and edges, and we plan an easy way to clean the floor around running machines.
Timeline working back from 18 December 2026
For Indian shows we ask for a brief 6 to 8 weeks before opening, which for ChennaiWood means between about 23 October and 6 November 2026. If you are reading this later, contact us now and we will tell you plainly what is possible in the time left.
- Brief: plot, open sides, machine list with sizes and power needs, exhibitor manual.
- Concept: 3D design and revisions, agreed quickly to protect build time.
- Fabrication: in our own factory by our own crew, with no subcontracting.
- Check: the stall is assembled once and checked against the approved design before it leaves.
- Artwork: final files five working days before stall possession.
- Installation: our crew builds the stall at the Chennai Trade Centre and hands it over.
Checklist before the show
- Machine sizes, weights and power load shared with us and the organiser.
- Power ordered by the organiser's deadline.
- Demo operator and safety plan for running machines.
- Sample boards, swatches and catalogues printed.
- Dealer and buyer meetings booked in advance.
- Plan for storage or reuse of the stall after the show.
Questions exhibitors ask
Can you build in Chennai?
Yes. We build your stall and our own crew installs it at the venue in Chennai. Our team has 6+ years in stall fabrication and has delivered work in 34 cities.
Is the first concept free?
Yes, for an upcoming show. Request it on our free stall design page; we reply within one working day.
Can we reuse the stall for other interiors shows?
Yes. We can store the stall and refit it with new graphics for your next show.
