Aircraft Interiors India Stall Guide: Yashobhoomi, March 2027
Aircraft Interiors India, 3 to 4 Mar 2027 at Yashobhoomi, New Delhi: what aviation interiors buyers look for, stall layout ideas and a brief-by timeline.

Aircraft Interiors India is listed for **3 to 4 Mar 2027** at Yashobhoomi (India International Convention & Expo Centre), New Delhi, as shown in venue and organiser calendars; confirm with the organiser. It focuses on the cabin: seats, galleys, lighting, materials, in-flight entertainment and the services that go with them.
A two-day show is short. Every hour on the floor matters, and the stall has to work hard from the first morning. This guide covers who the show is likely to draw, what an interiors stall should showcase and how to plan the timeline.
Who you are likely to meet
Cabin interiors sit where design, engineering and certification meet. Visitors tend to be specialists who know exactly what they need.
- Airline product, cabin and procurement teams.
- Maintenance and refurbishment specialists looking at retrofit options.
- Designers and engineers working on cabin layouts and materials.
- Suppliers looking for partners in the Indian aviation supply chain.
What to showcase
Interiors are physical and sensory. Buyers want to sit in the seat, touch the fabric, see the lighting change and check the finish on an edge. A stall that lets them do that will hold attention far better than one built around posters.
- **A cabin vignette**: a short section of seating, a galley face or a lavatory module, built to show your product in context.
- **Material swatch wall**: fabrics, leathers, laminates and floor coverings, labelled and easy to handle.
- **Lighting demos**: mood lighting scenes shown in a darker corner so the effect is visible.
- **Certification panel**: the standards and approvals your products meet, written clearly.
- **IFE or connectivity demo**: a seat-back screen or app running on real hardware.
Layout ideas for an interiors stall
Treat the stall like a showroom. Build a cabin-style zone with a lower ceiling to recreate the feel of being on board, and leave the rest of the stall open for meetings. Use a calm, light palette so materials and colours read true. Seats and modules are heavy, so check floor and delivery arrangements in the exhibitor manual early.
Yashobhoomi is a modern convention and expo centre. Even so, each show sets its own height limits, rigging rules and power arrangements. Read the exhibitor manual for this show before design is final.
Making two days count
With only two show days, pre-booked meetings carry a lot of the value. Invite airline and MRO contacts in advance and give them a time slot. On the stall, keep the meeting area away from the vignette so demonstrations and discussions do not compete for the same space.
Lighting deserves extra thought. Cabin products are often judged on colour and finish, and hall lighting can be flat or cool. Build your own lighting into the stall so fabrics, leathers and laminates look as they would in the aircraft. If you show mood lighting, a partly enclosed zone helps visitors see the effect properly.
Finally, plan the after-show. Note what each visitor sat in, touched or asked about. A follow-up that says which seat or material they tried is far more useful than a general brochure.
Timeline working back from 3 March 2027
We ask for a brief 6 to 8 weeks before the show. For Aircraft Interiors India, that means **between 6 and 20 January 2027**. A cabin vignette needs extra design and build time, so lean towards the earlier date.
- By early January: brief with stall size, open sides and the products you will show.
- Mid January: 3D concept, revisions and sign-off.
- Late January: drawings submitted as the manual requires; power and services ordered.
- February: fabrication of structure, vignette and graphics in our factory.
- 5 working days before stall possession: final artwork files with us.
- Before dispatch: the stall is assembled once and checked against the design.
- Build-up: our own crew installs it at Yashobhoomi.
Checklist
- Confirm product delivery dates; seats and modules may come from overseas.
- Plan who will staff the stall on both days, including a technical lead.
- Prepare spec sheets and certification details for every product shown.
- Book meetings with airline and MRO contacts before the show.
- Plan how the vignette will be protected and packed after the show.
Questions exhibitors ask
Can you build a realistic cabin section?
We build display structures, finishes and lighting to recreate the feel of a cabin around your real products. Your seats, galley parts or panels sit inside a set built to the approved design.
Can the stall be reused at other aviation shows?
Yes. Stalls can be stored and reused for the next show, and a modular vignette can be reconfigured.
How do we start?
Send your stall size and product list. We reply within one working day, and the first concept for an upcoming show is free through our free stall design page. Our team has 6+ years in stall fabrication, and we do not subcontract the build.
