# Yashobhoomi New Delhi Stall Planning Guide: Exhibiting at IICC Dwarka

> Planning a stall at Yashobhoomi (IICC), Dwarka Sector 25: possession, height, power and load-in checks, plus upcoming shows at Delhi's newest expo centre.

Canonical: https://kaamkraft.com/blog/yashobhoomi-new-delhi-stall-planning-guide

Last updated: 2026-10-28

- **Category**: Venue guides
- **Published**: 2026-10-26
- **Tags**: Yashobhoomi, IICC, Dwarka, New Delhi, exhibition stall, venue guide

Yashobhoomi in Dwarka is Delhi's newest convention and expo centre, used for large B2B shows and conferences. Its full name is the India International Convention & Expo Centre, and it sits in Dwarka Sector 25 in the south-west of the city. For exhibitors, a new venue brings modern halls and services, but also rules and processes that many teams have not worked with before.

This guide covers the practical side of planning a stall at [Yashobhoomi](https://kaamkraft.com/venues/yashobhoomi-new-delhi): what to check in the exhibitor manual, how to plan possession and build-up, and which shows are coming up. It does not replace the manual for your show, which always has the final word.

## Upcoming shows at Yashobhoomi

The venue's calendar covers travel, aviation, agriculture, coatings, advertising and machine tools. Dates are as listed in venue and organiser calendars; confirm with the organiser.

- [SATTE New Delhi](https://kaamkraft.com/shows/satte-new-delhi) - : 19 to 21 Jan 2027, travel and tourism trade.
- [Aircraft Interiors India](https://kaamkraft.com/shows/aircraft-interiors-india) - and [MRO Xpo India](https://kaamkraft.com/shows/mro-xpo-india) : 3 to 4 Mar 2027, sharing dates with the MRO South Asia Summit.
- [Horti Agri India Expo](https://kaamkraft.com/shows/horti-agri-india-expo) - : 5 to 7 Mar 2027.
- [PaintIndia](https://kaamkraft.com/shows/paintindia) - : 12 to 13 Mar 2027, paints and coatings.
- [ad:tech New Delhi](https://kaamkraft.com/shows/ad-tech-new-delhi) - : 17 to 18 Mar 2027.
- [India Machine Tools New Delhi](https://kaamkraft.com/shows/india-machine-tools-new-delhi) - : 14 to 17 May 2027, alongside IMTOS.

Notice how close some of these dates are. In early March, three events share 3 to 4 Mar and another opens on 5 Mar. Back-to-back shows usually mean tight build-up and dismantling windows, so your stall must go up and come down on schedule.

_At another show._

## What to check in the exhibitor manual

Each show at Yashobhoomi will issue its own exhibitor manual. Read it before the design is final and confirm these points.

1. **Possession time:** when your plot is handed over and how many hours you have to build.
2. **Height limit:** the maximum stall height, and any rules for double-decker stalls or hanging structures.
3. **Rigging:** whether overhead banners can be hung, and how to order rigging points.
4. **Power:** the load available, supply type, the application form and its deadline.
5. **Load-in:** vehicle access, unloading bays, goods lifts if any, and time slots for deliveries.
6. **Floor rules:** what can be fixed to the floor, and protection needed for heavy items.
7. **Fire and safety:** approved materials, fire extinguishers and emergency access widths.
8. **Dismantling:** the time allowed to clear the plot after the show.

Submit stall drawings and service orders by the deadlines in the manual. Late orders at a busy venue can mean higher charges or no service.

## Planning for a modern convention venue

New convention centres tend to have high standards for finish, cleanliness and safety. Plan the stall with that in mind.

- Use clean, well-finished materials, as rough site work may not be allowed.
- Expect strict rules on painting, cutting and gluing inside the hall, so most work must be done before arrival.
- Plan cable routes carefully, using raised floors or covered channels.
- Bring floor protection if you are displaying heavy machines, such as at a machine tools show.
- Keep emergency routes and fire equipment clear in your layout.

### Getting there

Dwarka is on the airport side of the city, which suits visitors flying in. Your team should still plan travel times carefully on build-up days, as possession slots are fixed and delays cost build time.

## Designing for Yashobhoomi shows

The shows here cover very different audiences. A travel stall at SATTE needs open, welcoming spaces for meetings with agents. An aviation interiors stall needs fine finishes and product samples. A machine tools stall needs strong floors, running machines and safe viewing zones. The venue is the same, but the stall plan changes with the show.

Whatever the show, a few things hold at a large convention venue. Visitors walk long distances, so a clear headline and logo visible from far down the aisle help them find you. Meeting space matters at B2B shows, so set aside a seated area even on a modest plot. Lighting in large halls can feel flat, so plan your own stall lighting to make products and graphics stand out.

## Timeline and how we build

For shows in Delhi, send us the brief 6 to 8 weeks before. Artwork files are needed 5 working days before stall possession.

We design in 3D and build in our own factory with our own crew. We do not subcontract the build. Every stall for an Indian show is assembled once and checked against the approved design before it leaves, so the build fits the venue's fixed possession window. Our team has 6+ years in stall fabrication and has delivered work in 34 cities.

## Questions exhibitors ask

### Can a stall built for Yashobhoomi be reused at another Delhi venue?

Yes. Stalls can be stored after the show and reused, with changes for the new plot and venue rules.

### Do you help with exhibitor manual forms?

We prepare stall drawings and help you work out power and service needs for your submissions.

### How do we start?

Send your show, plot and display list through our [free stall design](https://kaamkraft.com/free-stall-design) form. The first concept is free, and we reply within one working day.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
