# Smart Cities India Expo Stall Guide: Urban Tech at Bharat Mandapam

> Smart Cities India Expo, 23 to 25 Mar 2027 at Bharat Mandapam: stall planning for urban technology exhibitors meeting city officials, planners and partners.

Canonical: https://kaamkraft.com/blog/smart-cities-india-expo-stall-guide

Last updated: 2026-10-28

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: Smart Cities India Expo, Bharat Mandapam, New Delhi, urban technology, exhibition stall

[Smart Cities India Expo](https://kaamkraft.com/shows/smart-cities-india-expo) is listed for **23 to 25 Mar 2027** at [Bharat Mandapam (Pragati Maidan)](https://kaamkraft.com/venues/bharat-mandapam-new-delhi), New Delhi, as shown in venue and organiser calendars; confirm with the organiser. It sits in the technology, IT and telecom sector, with a focus on the systems that help cities run better.

Urban technology is a broad field. Traffic management, surveillance, water and energy metering, waste management, e-governance, connectivity and data platforms all compete for attention. The common problem is that much of this is invisible: software, sensors and networks. This guide covers how to make it visible on a stall.

## Who the show is likely to draw

- Municipal and city agency officials responsible for services and projects.
- Urban planners, consultants and project management teams.
- System integrators looking for products and partners.
- Telecom, utility and infrastructure companies.
- Start-ups and investors in the urban technology space.

Public-sector visitors look for proven deployments, compliance with procurement requirements and long-term support. Integrators want products that work with their systems. Both groups need to understand quickly what problem you solve.

_Looking in from the aisle._

## Making invisible technology visible

- **A city model**: a tabletop model or map with lit points that show where your sensors or systems sit and what they control.
- **Live dashboard**: a large screen with a command-centre style view, fed by demo data or real hardware on the stall.
- **Hardware on display**: sensors, meters, cameras or kiosks mounted as they would be in the field.
- **Use-case panels**: short problem-and-solution stories, one per panel, in plain language.
- **Deployment map**: cities or projects where your systems run, if you are allowed to show them.

### Layout for a technology stall

Place the dashboard and city model at the front where they can be seen from the aisle. Mount hardware on a feature wall nearby. Keep a meeting space at the back for officials and integrators who want detail. On an island stall, the command-centre screen can form the centre, with demos on each side.

### Network and power

Demos need reliable connectivity. Do not depend only on hall Wi-Fi. Order a wired connection if the organiser offers one and keep a mobile backup. Count every screen, server and device, then order power with a margin. Check the exhibitor manual for rules on height, rigging large screens and running equipment.

### Speaking to public-sector buyers

Officials often have limited time and many stalls to see. Give them a one-page summary: what you do, where it is deployed, and how it fits public procurement. Keep staff who understand tendering and implementation on the stall, not only product specialists. A calm, professional stall with clear information tends to suit this audience better than flashy effects.

### Hosting presentations on the stall

Short presentations draw people in. If you plan scheduled talks or demos, build a small presentation area with a screen and a few seats, and post the timings at the front of the stall. Keep each session short, around ten minutes, and end with a clear invitation to talk further at the meeting table.

If your stall is shared with partners, such as an integrator and a hardware maker, show how the pieces fit together in one story rather than as separate booths under one roof.

## Timeline working back from 23 March 2027

We ask for a brief 6 to 8 weeks before the show, which means **between 26 January and 9 February 2027**. A city model or command-centre wall takes extra design time, so aim early.

1. By late January: brief with stall size, open sides, demo plans and hardware list.
2. Early February: 3D concept, revisions and approval.
3. Mid February: drawings, screen and power orders submitted as the manual requires.
4. Late February to March: fabrication, model and graphics in our factory.
5. 5 working days before stall possession: final artwork and screen content ready.
6. Before dispatch: the stall is assembled once and checked against the design.
7. Build-up: our own crew installs; your team sets up and tests demos.

## Checklist

- Build demo content that runs offline if the network fails.
- Prepare a short summary sheet for officials and a technical sheet for integrators.
- Bring mounting brackets and spares for all field hardware.
- Plan who presents the dashboard and how often.
- Record leads by type: city agency, consultant, integrator or partner.

## Questions exhibitors ask

### Can you build a city model for the stall?

We design and build display models and feature walls as part of the stall, planned around your hardware and screen content.

### Can the stall be reused at other technology shows?

Yes. Stalls can be stored and reused for the next show, and graphics can be changed for different audiences.

### How do we begin?

Send your stall size and demo plans. We reply within one working day, and the first concept is free through our [free stall design](https://kaamkraft.com/free-stall-design) page. Our team has 6+ years in stall fabrication and has delivered work in 34 cities, with our own factory and crew.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
