# PALM Expo Delhi 2027 Stall Guide: Sound, Light and Demo Spaces

> PALM Expo Delhi, 7 to 9 Jan 2027 at Bharat Mandapam: listening rooms, rigging, sound spill and power for audio and lighting stalls, with a November brief date.

Canonical: https://kaamkraft.com/blog/palm-expo-delhi-2027-stall-guide

Last updated: 2026-10-26

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: PALM Expo Delhi, New Delhi, Bharat Mandapam, pro audio, lighting, exhibition stall

[PALM Expo Delhi 2027](https://kaamkraft.com/shows/palm-expo-delhi-2027) is listed for 7 to 9 January 2027 at [Bharat Mandapam (Pragati Maidan)](https://kaamkraft.com/venues/bharat-mandapam-new-delhi) in New Delhi. Dates are as listed in venue and organiser calendars; confirm with the organiser.

PALM is known in India as a show for professional audio, lighting and music technology, and it draws a mix of trades connected to live events, installations and production. At a show like this, the stall is itself a demonstration. Visitors judge your products by how they sound and look on your stall. This guide covers the design choices that matter for audio and lighting exhibitors, a timeline from early January and a checklist.

## Who visits

- Live sound and lighting rental companies.
- System integrators working in venues, hotels, places of worship and corporate spaces.
- Event and production companies.
- Musicians, studio owners and audio engineers.
- Dealers and distributors looking for new brands.
- Architects and consultants specifying installed systems.

Many of these visitors are experts. They listen and look critically, and they will compare your demo with others in the same hall. A stall that looks good but sounds poor, or a lighting demo washed out by hall light, does more harm than a modest stall that performs well. Design decisions should start from the demo you want to give.

_The stall busy with visitors._

## Designing for sound

### Listening rooms

A loudspeaker or studio monitor brand often needs a closed listening room. That room needs solid walls, a door that seals, acoustic treatment inside and seating for a small group. Plan the room size early, because it shapes the whole stall. Air flow matters too; a sealed room with a group of visitors inside warms up quickly over a long day, so ventilation must be designed in without letting sound escape.

### Controlling spill

Open demos in a crowded hall must respect the organiser's sound rules. Point speakers into the stall, use acoustic panels on the back walls and schedule loud demos at set times. Check the exhibitor manual for any sound level limits.

## Designing for light

### Rigging and trusses

Lighting brands need overhead truss to hang fixtures. Height limits, rigging points and approvals vary by show and hall. Send us your fixture list and weights at the brief so the structure and approvals can be planned together.

### Darker zones

Moving lights, lasers and LED effects look best in low light. A partially enclosed area with dark finishes lets your products perform while the rest of the stall stays bright for meetings. Haze, if you plan to use it, needs the organiser's approval, so ask early.

## Power and control

Audio and lighting stalls have high power needs and lots of cabling. Plan separate circuits where needed, hide cables in the platform and keep a clean control position for your demo operator. Apply for power before the organiser's deadline. Audio and lighting gear can be sensitive to unstable supply, so discuss distribution and any protection your equipment needs with your technical team before the brief.

- List every device with its power rating at the brief.
- Agree demo times and sound levels before the show.
- Keep a technical operator on the stall at all times.
- Bring spare cables, connectors and fuses.

## Timeline working back from 7 January 2027

Brief us 6 to 8 weeks before the show: **between 12 and 26 November 2026**. Rigging approvals and listening rooms take extra time, so earlier is better.

1. November: brief with plot, open sides, demo needs and fixture list.
2. Late November: 3D concept, revisions, approval and organiser submissions.
3. December: fabrication by our own crew, including acoustic rooms and truss plans.
4. Before dispatch: trial assembly checked against the approved design.
5. 5 working days before possession: final artwork files with us.
6. Build-up: our crew installs; your technical team rigs, patches and tests.

## Checklist for audio and lighting exhibitors

- Exhibitor manual read for height limits, rigging rules and sound limits.
- Fixture and speaker list with weights, sizes and power needs.
- Demo playlist and show programme prepared and tested.
- Technical operator and backup named for each day.
- Product range labelled clearly, with prices or dealer terms ready.
- Meetings booked with key integrators and rental companies.
- Lead follow-up owner named before the show.

A January show also means the build and brief overlap with the year-end holiday period. Plan approvals and artwork around those dates so nothing is waiting on someone who is away.

## Questions exhibitors ask

### Can you build an acoustic listening room?

Yes. We design and build enclosed rooms with doors, treatment and seating, within the show's height and structure rules.

### Can we reuse the stall?

Yes. Stalls can be stored and reused for the next show with new graphics. Truss and acoustic panels reuse especially well, and a modular listening room can be rebuilt in a different position on a new plot.

### Is the first concept free?

Yes. Your first stall concept for an upcoming show is free, and we reply within one working day. Use our [free stall design](https://kaamkraft.com/free-stall-design) form.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
