# Lighting World and Hometech Expo Stall Guide: Bharat Mandapam 2027

> Lighting World and Hometech Expo, 15 to 17 Feb 2027 at Bharat Mandapam: how lighting and home-tech exhibitors design a stall that shows light at its best.

Canonical: https://kaamkraft.com/blog/lighting-world-and-hometech-expo-stall-guide

Last updated: 2026-10-26

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: Lighting World, Hometech Expo, Bharat Mandapam, lighting, home technology, exhibition stall

[Lighting World and Hometech Expo](https://kaamkraft.com/shows/lighting-world-and-hometech-expo) is listed for **15 to 17 Feb 2027** at [Bharat Mandapam (Pragati Maidan)](https://kaamkraft.com/venues/bharat-mandapam-new-delhi), New Delhi, as shown in venue and organiser calendars; confirm with the organiser. It sits in the building and interiors sector, covering lighting products and technology for the home.

Lighting is one of the hardest products to show at an exhibition. Halls are bright, neighbours have their own lights, and a fitting that looks beautiful in a dark living room can look flat under hall lights. This guide is about solving that problem and planning a stall that sells.

## Who comes to a lighting and home-tech show

- Electrical and lighting dealers and distributors looking for new ranges.
- Architects, interior designers and lighting designers specifying for projects.
- Builders and developers sourcing for residential projects.
- Electricians and installers who want products that are easy to fit.
- Homeowners and retail buyers interested in smart home features.

Professional visitors want to see light quality, colour, beam angles, controls and finish. Dealers also want margins, packaging and after-sales support. Your stall should answer both groups.

_The stall open and busy._

## Showing light properly

The single most useful decision is to control the light inside your stall. That usually means some enclosure.

- **Dark room or dim zone**: a partly enclosed area with a ceiling or dark baffles, so fittings show their true effect.
- **Room settings**: small living room, kitchen or bedroom vignettes that show fittings in context.
- **Comparison wall**: the same space lit at different colour temperatures or beam angles, side by side.
- **Control demo**: a smart switch, app or panel that visitors can use to change scenes.
- **Product wall**: the full range, lit and labelled, for dealers who need to see everything.

### Layout ideas

Keep the aisle frontage bright and open with the product wall and a counter. Lead visitors into the darker vignettes behind. On an island stall, the dark zone can sit in the centre with open product walls around it. Plan cable routes for every fitting from the start, because a lighting stall can carry many more connections than a normal one.

### Power and practical checks

Count every fitting and its wattage, then order power with a margin. Plan circuits so a fault does not take down the whole stall. Check the exhibitor manual for height limits, ceiling rules and fire requirements, which matter if you plan an enclosed room. Also plan heat and ventilation inside dim zones, as many fittings in a small room can warm it quickly.

### Smart home and hometech products

Home technology is best shown working. Set up a small connected home: lights, switches, sensors, curtains or locks linked to one app. Let visitors trigger a scene. Keep a demo tablet chained to the counter, and have a fallback if the hall network is slow.

### Talking to specifiers and dealers

Architects and lighting designers want a quiet place to look at catalogues, photometric data and project references. Dealers want to talk margins and stock. Give them different spots: a design table near the vignettes and a counter near the product wall. Staff who know which conversation they are in will convert more visitors.

Packaging also matters for dealers. Show a few products in their retail boxes on a shelf, so dealers can picture them in their shops.

## Timeline working back from 15 February 2027

We ask for a brief 6 to 8 weeks before the show, which for 15 February means **between 21 December 2026 and 4 January 2027**. With year-end holidays in that window, earlier is safer.

1. By late December: brief with stall size, open sides, product list and wattages.
2. Early January: 3D design showing light zones and vignettes; revisions and approval.
3. Mid January: drawings and power orders submitted as the manual requires.
4. Late January to early February: fabrication, wiring routes and graphics in our factory.
5. 5 working days before stall possession: final artwork files with us.
6. Before dispatch: the stall is assembled once and checked against the design.
7. Build-up: our own crew installs; you fit and test every product.

## Checklist

- Send a fitting schedule with each product's location, wattage and mounting type.
- Bring spares for every fitting and driver.
- Plan who will test and focus lights during build-up.
- Prepare dealer price lists and project specification sheets.
- Capture leads by type: dealer, specifier, builder or retail.

## Questions exhibitors ask

### Can you build a dark room inside the stall?

Yes, within the venue's height and fire rules. We design partial enclosures, ceilings or baffles that block hall light.

### Can the stall be reused?

Yes. Stalls can be stored and reused for the next show, and vignettes can be refreshed with new products.

### How do we start?

Send your stall size and product list. We reply within one working day, and the first concept is free through our [free stall design](https://kaamkraft.com/free-stall-design) page. We build in our own factory with our own crew.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
