# Embedded Tech India Stall Guide: Showing Small Products to Engineers

> Embedded Tech India, 23 to 25 Mar 2027 at Bharat Mandapam: how to display boards, modules and dev kits for engineers, with a brief-by date and checklist.

Canonical: https://kaamkraft.com/blog/embedded-tech-india-stall-guide

Last updated: 2026-10-26

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: Embedded Tech India, New Delhi, embedded systems, electronics, exhibition stall

**Embedded Tech India** is listed for **23 to 25 Mar 2027** at **Bharat Mandapam (Pragati Maidan)**, New Delhi, as listed in venue and organiser calendars; confirm with the organiser. It is a technology show for embedded systems: the processors, boards, modules, software and tools that sit inside products from appliances to vehicles and industrial machines.

Embedded products share one design problem. They are small, they look alike to a passer-by, and their value is in what they do, not what they look like. A good stall solves that. See our [Embedded Tech India show page](https://kaamkraft.com/shows/embedded-tech-india) for listing details and our [Bharat Mandapam venue page](https://kaamkraft.com/venues/bharat-mandapam-new-delhi) for venue notes.

## Who you will meet

Most visitors are technical. Many will know more about a datasheet than about branding, and they judge an exhibitor by how well its people answer questions.

- Hardware and firmware engineers looking for chips, modules and development kits.
- Product managers from consumer electronics, automotive, industrial and medical device companies.
- Start-up founders searching for partners and design services.
- Purchase and supply chain teams checking availability and lead times.
- Students and researchers exploring the field.

Plan the stall so engineers can get to a working demo quickly, and so purchase teams can find a quiet place to talk about volumes and pricing.

Engineers at a show like this often arrive with a specific problem: a power budget, a connectivity need or a part that has gone out of supply. Train your stall staff to ask about the visitor's project first, then point to the right demo. A stall layout with clearly labelled zones makes that handover quick.

_The lit fascia from down the aisle._

## Making small products visible

### Use the application, not the board

A bare circuit board means little from the aisle. Show it inside something people recognise: a smart meter, a drone, a wearable, a motor controller or a car dashboard. Put the board beside the product, with a short line on what it does.

### Demo benches at standing height

Build two or three demo benches where engineers can stand, see the board running and look at the output on a screen. Give each bench a clear title such as motor control, connectivity or vision.

### Magnify the detail

Large-format photographs, close-up camera feeds or illuminated display cases help visitors see small components. Back-lit graphics with a clean, dark background make boards stand out.

### Keep cables and power tidy

Embedded demos involve many cables, adaptors and laptops. Plan hidden cable routes and enough power points inside the counters so the stall looks clean all day.

## Layout ideas

- A product wall of real end applications along the back, each with its board alongside.
- Demo benches at the front edge so engineers can step straight in.
- A small partner or ecosystem wall listing supported tools and software.
- A meeting table or small room for design-in and pricing conversations.
- Secure storage for development kits, samples and give-away boards.

Embedded Tech India is listed on the same dates and at the same venue as Smart Mobility India Expo and Water & Cleantech India Expo. If your products serve those markets too, consider application displays that speak to visitors crossing between halls.

## Timeline working back from 23 Mar 2027

1. **26 Jan to 9 Feb 2027**: send the brief, 6 to 8 weeks before the show, with stall size, open sides and demo list.
2. **February**: 3D design, revisions and sign-off; organiser submissions if required.
3. **Late February to March**: fabrication and graphics. The stall is assembled once and checked against the approved design before it leaves.
4. **5 working days before possession**: final artwork files with us. Check the possession date in the exhibitor manual.
5. **Possession**: our own crew installs the stall; your engineers set up and test demos.

## Checklist for embedded exhibitors

- List every demo with its power and network needs.
- Order wired internet if a demo relies on the cloud, and keep an offline fallback.
- Prepare short datasheets and QR codes to full documentation.
- Decide which samples or kits you will give away and how you will qualify those requests.
- Staff the stall with at least one application engineer at all times.
- Plan to store the stall and reuse it at the next electronics show.

## Questions exhibitors ask

### Should we bring our whole product range?

Usually not. Bring the products that match the visitors you expect, and show the rest through a catalogue, screen or QR code. A focused display is easier to understand and easier to staff.

### Our stall is small. Can it still work?

Yes. On a small stall, pick one hero application and one demo bench. Clear focus beats a crowded table of boards.

### Can you build lit display cases for components?

Yes. We design lit cases, magnifier panels and demo counters as part of the stall. Tell us the size of the smallest item you want to show, and we will plan the lighting and viewing height around it.

### How do we start?

Request a [free stall concept](https://kaamkraft.com/free-stall-design). We reply within one working day.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
