# EICMA Milan Stand Guide for Indian Two-Wheeler and Parts Exhibitors

> EICMA at Fiera Milano, Rho: how Indian two-wheeler, EV and parts makers plan a locally built stand, the 10-week brief and what visitors expect to see.

Canonical: https://kaamkraft.com/blog/eicma-esposizione-internazionale-del-ciclo-e-motociclo-stand-guide-for-indian-exhibitors

Last updated: 2026-10-26

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: EICMA, Milan, two-wheelers, auto components, exhibiting abroad

EICMA, the Esposizione Internazionale del Ciclo e Motociclo, is the international cycle and motorcycle exhibition held in Milan. The current edition is listed for **5 to 8 Nov 2026** at **Fiera Milano, Rho**, as listed in venue and organiser calendars; confirm with the organiser.

India is one of the largest two-wheeler markets in the world, so Indian makers of motorcycles, scooters, electric two-wheelers, components and accessories have a strong reason to be there. This guide explains how to plan a stand for it. See our [EICMA show page](https://kaamkraft.com/shows/eicma-esposizione-internazionale-del-ciclo-e-motociclo) for listing details.

## A note on timing

We ask for an overseas brief about 10 weeks before the show. For the November 2026 edition, that point was late August. If you are reading this now, use this edition to visit and study the halls, then plan for the next edition with a full 10 weeks in hand.

Starting early also helps with things outside the stand. Vehicles need shipping and import paperwork, staff need Schengen visas, and hotels near the fairground fill quickly in show week. A 10-week runway lets all of these run in parallel instead of one after another.

_Plinths and lightbox_

## What EICMA visitors come to see

The show mixes trade and enthusiast audiences. Dealers, distributors, fleet buyers and component buyers walk the same aisles as riders and the press. Your stand has to work for both without losing focus.

- **Vehicles** shown at eye level on low plinths, with room to walk around them.
- **Components** such as brakes, lighting, wheels, batteries and electronics mounted on clear display walls with labels.
- **Electric drivetrains** explained with a cut-away or exploded display, and a screen for range and charging data.
- **A trade meeting area** set apart from the public flow, where dealers and distributors can sit.

## Layout ideas for a two-wheeler stand

### Hero vehicle at the corner

On a corner or island space, place one hero vehicle where both aisles can see it. Light it well and keep the floor around it clear. Supporting models sit further back.

### Parts wall with a story

For a component maker, a wall showing the part next to the vehicle it fits into helps buyers understand your range quickly. Add handling samples at the counter.

### Quiet corner for distributors

Export deals start with a conversation. A partly enclosed meeting space with a table, screen and storage keeps those talks private.

### Lighting that suits paint and chrome

Vehicles reflect everything. Poor lighting creates glare on paint and chrome, while good lighting shows the lines of the bike. We plan soft, even light from above with focused spots on details such as instruments, engines and wheels.

### Room for test sits

Visitors want to sit on a motorcycle or scooter. Leave space around at least one model for this, and keep a staff member close so it stays orderly on busy days.

## How a locally built stand works

Nothing is shipped from India. We design the stand in 3D, it is built locally near the venue in Milan to our drawings, and our team manages the build and installs it. Vehicles and parts for display travel separately through your forwarder, so start that planning early as well.

Our team checks the stand against the approved design before handover, so what you approved in 3D is what you see on the first morning. If you plan to return the following year, the stand can be stored and reused, with new graphics for each edition.

## A 10-week plan for the next edition

1. Week 10: brief, stand space details, display list and vehicle sizes.
2. Weeks 10 to 8: 3D concept, revisions and final design.
3. Weeks 8 to 6: organiser submissions, floor loading and power orders.
4. Weeks 6 to 2: local build near the venue.
5. 5 working days before possession: final artwork with us.
6. Build-up: installation, vehicle placement and handover.

## Checklist

- Confirm vehicle shipping, import paperwork and arrival date for build-up.
- Plan graphics in English, with Italian for key lines if you target local dealers.
- Arrange staff visas and hotels early, as Milan fills up during the show.
- Decide on lead capture and dealer follow-up before you travel.
- Ask about storing the stand for reuse at the next edition.

## Questions exhibitors ask

### Can a vehicle be displayed on a raised platform?

Yes, subject to the organiser's rules. We plan ramps, floor loading and safe access in the design.

### Should we use the same stand design as our Indian shows?

You can keep the same brand look, but plan the layout for EICMA's mix of trade and public visitors. The European stand usually needs more open space around vehicles and a more private trade area than a typical Indian auto show stall.

### How quickly do you reply?

Within one working day. The first concept for an upcoming show is free through [free stall design](https://kaamkraft.com/free-stall-design). Share last year's photos or your Indian stall design if you have them, as they help us start faster.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
