# Aircon Expo 2026 Stall Guide: Planning for Bharat Mandapam, New Delhi

> Aircon Expo stall planning for 21 to 23 Dec 2026 at Bharat Mandapam: who the show draws, what to display, layout ideas, brief-by dates and a checklist.

Canonical: https://kaamkraft.com/blog/aircon-expo-stall-guide

Last updated: 2026-10-28

- **Category**: Show guides
- **Published**: 2026-10-26
- **Tags**: Aircon Expo, New Delhi, Bharat Mandapam, HVAC, exhibition stall

Aircon Expo is listed for 21 to 23 Dec 2026 at Bharat Mandapam (Pragati Maidan) in New Delhi. As the name suggests, it is a meeting point for air conditioning and related cooling businesses, alongside suppliers from neighbouring sectors.

For manufacturers, distributors and component suppliers, a Delhi show reaches dealers, contractors and consultants from across north India. This guide covers who to expect, what to put on the stall and how to work back from the show dates.

## Who the show draws

- Dealers and distributors looking for brands and product lines to carry.
- HVAC contractors and installers who want reliable products and quick support.
- Consultants and building services engineers who specify equipment for projects.
- Facility managers and developers planning cooling for commercial buildings.
- Component and spares buyers: compressors, coils, controls, insulation and refrigerants.

Most of these visitors are technical or commercial buyers. They want to compare models, efficiency, service networks and dealer terms.

_Fascia and lighting_

## What your stall should showcase

Cooling products can look alike from the aisle. The stall has to make differences visible.

- Working units, where the organiser allows, so visitors feel airflow and hear noise levels.
- Cut-away units or exposed components that show build quality inside.
- Efficiency and capacity figures on clear panels, stated as you would in a quotation.
- A dealer corner with seating, for discussing terms and territories.
- A service and spares panel showing where support comes from.

### Layout ideas for an HVAC stall

Put the strongest product on the open corner, lit well and angled to both aisles. Line up the range along one wall at eye height, with labels for capacity and type. Keep the back of the stall for a meeting table and storage. For controls and smart systems, add a screen or touch panel at standing height so visitors can try them.

Running units produce heat and need power. Plan the power load and placement with us early, so the electrical application to the organiser includes everything.

### Dealers first or projects first

Decide early whether the stall is mainly for dealers or for project buyers. A dealer-focused stall shows the full range, pricing tiers and point-of-sale support, with plenty of seating for long conversations about margins and territories. A project-focused stall shows large or ducted systems, case studies of installed sites and a meeting area for consultants who bring drawings. Many companies need both, so we split the plot into two clear zones rather than mixing the messages on every wall.

### Graphics and lighting

Cooling brands often use blue and white, so many stalls in the hall will look similar. Use your own brand colours with confidence and keep the main message short. Light the products, not just the graphics. Backlit fascia panels help visitors find you across a large hall, while spotlights on units bring out finish and detail.

Large screens work well for showing installed sites and control apps, but keep the sound low. A noisy stall makes conversations hard and annoys neighbours.

## Timeline working back from 21 Dec 2026

1. Brief by 26 Oct 2026 to 9 Nov 2026: that is 6 to 8 weeks before the show.
2. First 3D concept and revisions within the following days.
3. Drawings and power requirements submitted as the exhibitor manual requires.
4. Fabrication by our own crew; the stall is assembled once and checked against the approved design before it leaves.
5. Artwork files at least 5 working days before stall possession.
6. Installation on the build-up days, then the show from 21 to 23 Dec 2026.

If you are reading this after 9 Nov 2026, talk to us at once. We will tell you honestly what can be built in the time left.

## Exhibitor checklist

- Plot plan, open sides and height limit from the organiser.
- Power load for every running unit and screen.
- Units and samples scheduled to arrive at the venue on build-up day.
- Dealer enquiry form and price list ready.
- Staff rota with at least one technical person on every shift.
- Plan to store the stall for reuse at your next show.

Bring enough brochures and price lists for three full days, and keep spare stock in the stall store rather than in a car outside. Visitors in Delhi often come in groups from the same dealer or contracting firm, so plan seating for three or four at the meeting table, not two.

For venue details, see our [Bharat Mandapam page](https://kaamkraft.com/venues/bharat-mandapam-new-delhi).

## Questions exhibitors ask

### Who builds the stall?

We do, with our own factory and own crew. Our team has 6+ years in stall fabrication, and we do not subcontract the build.

### Can we see a design first?

Yes. The first stall concept is free for an upcoming show, and we reply within one working day. Request a [free stall design](https://kaamkraft.com/free-stall-design).

### Can the stall be used again?

Yes. Stalls can be stored and reused for the next show. If you exhibit at other HVAC or building services shows, a modular design makes reuse easier.

## Related

- [Blog](https://kaamkraft.com/blog)
- [Home](https://kaamkraft.com/)
